ANCHOR FLUID POWER
ANCHOR FLUID POWER
Mailing Address:
5553 Murray Road,
Cincinnati, OH 45227
Phone: 866.FLANGES
Fax: 513.527.4449
E-Mail: sales@anchorfluidpower.com
Website: www.anchorfluidpow.wpengine.com
Print Back
  • Any port can be pressurized on AE3K series. Backup O-ring behind seat prevents internal leakage.
  • Carbon steel with zinc nickel plating.
  • PEEK seats and Buna O-rings standard on AE3K series (-11PB).
  • Handle shown in Handle Code field supplied standard.
Unit of Measure

Specifications

Brands

 N/A Anchor Fluid Power

Nominal Size (DN)

 N/A 12 mm

Connection Type

 N/A National Pipe Thread (NPT)

Connection Size

 N/A 1/2 in. - 14

Handle Code

 N/A 14

Weight

 N/A 2.1 lb

Maximum Pressure

 N/A 7250 psi

Locking Kit Part Number

 N/A LK12

Port Type

 N/A "Diverter" L-Port

Bore Restriction

 N/A Unrestricted Bore

Body and Adapter Material

 N/A Carbon Steel

Ball and Stem Material

 N/A Carbon Steel

Adapter and Stem Seals Material

 N/A Buna

Ball and Stem Seats Material

 N/A Polyetheretherketone (PEEK) (Standard)

Locking Kit

 N/A No Yes

Plating

 N/A Zinc Nickel

Number of Ways

 N/A 3

Dimensions

Dimension L

 N/A 3.23 in

Dimension L2

 N/A 2.01 in

Dimension B

 N/A 1.77 in

Dimension B1

 N/A 1.61 in

Dimension B2

 N/A 2.38 in

Dimension H

 N/A 1.77 in

Dimension H1

 N/A 0.87 in

Dimension H2

 N/A 1.91 in

Dimension SW

 N/A 1.18 in

Dimension SW1

 N/A 0.39 in

Ball Valve Pressure Specifications

Ball Valve Pressure Specifications

 N/A Anchor Fluid Power ball valves are tested in accordance with ISO 12266-1 standards. End connections are manufactured in accordance with one or more of the following standards.

SAE J1926-1
ISO 228-1
SAE J518-1
SAE J518-2
ISO 6162-1
ISO 6162-2
ANSI B.1.20.1

Note

Note

 N/A Dimensions subject to change without notice.

Please consult your system's seal manufacturer for recommendation of seal selection, as Anchor Fluid Power does not accept responsibility for seal selection.