Print Back
The HP series contains high pressure quick couplings. Typical in steel or stainless steel, the HP series is offered with a variety of options and pressure ratings with bore sizes ranging from 4-50 millimeters. Although grouped in the HP series family, subsea variations of the high pressure series is distinctly different. Specifics on the subsea HP series as well as other couplings can be found in the Offshore & Subsea Technology brochure.
Unit of Measure

Specifications

Nominal Bore Diameter

N/A 20 mm

Maximum Working Pressure for High Strength Stainless Steel

N/A 5,080 psi

Coefficient of Variation (CV) Value/One Side Self-Sealing

N/A 13

Coefficient of Variation (CV) Value/Both Sides Self-Sealing

N/A 8.5

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA)

N/A 185.65 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA)

N/A 121.39 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA)

N/A 657.89 m³/h

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA)

N/A 430.16 m³/h

Maximum Permissible Static Pressure for Steel (Coupled)

N/A 400 bar5,800 psi

Maximum Permissible Static Pressure for Stainless Steel (Coupled)

N/A 210 bar3045 psi