ANCHOR FLUID POWER
ANCHOR FLUID POWER
Mailing Address:
5553 Murray Road,
Cincinnati, OH 45227
Phone: 866.FLANGES
Fax: 513.527.4449
E-Mail: sales@anchorfluidpower.com
Website: www.anchorfluidpow.wpengine.com
Print Back
The LP series contains low pressure quick couplings in 06, 07, LP and SP types. These couplings can be used for a variety of media, typcial for water, fuel, compressed air and oils. They are available in nominal bore sizes ranging from 2.5-50 millimeters and include a variety of material, finish and seal options.
Unit of Measure

Specifications

Brands

 N/A Anchor Fluid Power

Nominal Bore Diameter

 N/A 4 mm

Coefficient of Variation (CV) Value/One Side Self-Sealing

 N/A 0.36

Coefficient of Variation (CV) Value/Both Sides Self-Sealing

 N/A 0.30

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA)

 N/A 5.14 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA)

 N/A 4.28 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA)

 N/A 18.22 m³/h

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA)

 N/A 15.18 m³/h

Maximum Permissible Static Pressure for Steel (Coupled)

 N/A 110 bar1,595 psi

Maximum Permissible Static Pressure for Brass (Coupled)

 N/A 60 bar870 psi

Additional Information

Additional Information

 N/A LP series couplings are available in nominal bore sizes ranging from 2.5-50 millimeters and can withstand pressure up to 1450 psi. Products in this line a wide in a variety of materials, finishes, and seal options. Couplings are either self-sealing, self-sealing adaptors, thru type couplings, or thru type adaptors. View our full catalog of low-pressure Walther couplings below: