Print Back
The LP series contains low pressure quick couplings in 06, 07, LP and SP types. These couplings can be used for a variety of media, typcial for water, fuel, compressed air and oils. They are available in nominal bore sizes ranging from 2.5-50 millimeters and include a variety of material, finish and seal options.
Unit of Measure

Specifications

Brands

N/A Anchor Fluid Power

Nominal Bore Diameter

N/A 12 mm

Coefficient of Variation (CV) Value/One Side Self-Sealing

N/A 4.34

Coefficient of Variation (CV) Value/Both Sides Self-Sealing

N/A 3.28

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA)

N/A 61.98 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA)

N/A 46.84 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA)

N/A 219.63 m³/h

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA)

N/A 165.99 m³/h

Maximum Permissible Static Pressure for Steel (Coupled)

N/A 60 bar870 psi

Maximum Permissible Static Pressure for Brass (Coupled)

N/A 30 bar435 psi

Maximum Permissible Static Pressure for Stainless Steel (Coupled)

N/A 50 bar725 psi

Additional Information

Additional Information

N/A LP series couplings are available in nominal bore sizes ranging from 2.5-50 millimeters and can withstand pressure up to 1450 psi. Products in this line a wide in a variety of materials, finishes, and seal options. Couplings are either self-sealing, self-sealing adaptors, thru type couplings, or thru type adaptors. View our full catalog of low-pressure Walther couplings below: