ANCHOR FLUID POWER
ANCHOR FLUID POWER
Mailing Address:
5553 Murray Road,
Cincinnati, OH 45227
Phone: 866.FLANGES
Fax: 513.527.4449
E-Mail: sales@anchorfluidpower.com
Website: www.anchorfluidpow.wpengine.com
Print Back
Increased Productivity

The WALTHER IDHS connects to a hot stab receptacle like any other standard unit. However, it has 2 redundant supply lines attached. The internal valve design ensures that a damaged line will be isolated automatically while the other line takes over and the system stays operationable.

Subsequently, the hot stab can be disconnected and replaced during a scheduled maintenance at any convenient point in time. Even if both lines fail, the system automatically vents the receptacle.
Unit of Measure

Specifications

Brands Anchor Fluid Power
Size 2 x DN 6 mm
Working Pressure 690 bar10,000 psi
Maximum Water Depth 5,000 m
Material 1.3964 (Nitronic 50) AISI 316L Stainless Steel (1.4404)
Spring Material Hastelloy®
Seal Material1 Fluorocarbon (FKM) Hydrogenated Nitrile (HNBR)

Advantages

Advantages
  • No production loss due to a collapsing hydraulic hose
  • No emergency intervention required
  • Increased safety by drastically shorter response time

Improved Operational Safety

Improved Operational Safety The valve design allows further to vent directly at the IDHS location. This eliminates the necessity to vent / depressurize the complete line in case of an emergency shut down requirement. Subsequently actuator evacuation or valve actuation occur much faster than in other systems.

View items

Item #

Size

Maximum Water Depth

Material

List Price
8124 N/A 2 x DN 6 mm N/A 5,000 m N/A 1.3964 (Nitronic 50) AISI 316L Stainless Steel (1.4404) Quote
  • 1 Other qualities on request