• L-port design diverter valve.
  • Carbon steel with zinc nickel plating.
  • POM seats and Buna O-rings standard on carbon steel valves (-11DB).
  • Handle shown in Handle Code field supplied standard.
Unit of Measure

Specifications

Brands

N/A Anchor Fluid Power

Nominal Size (DN)

N/A 50 mm

Connection Type

N/A National Pipe Thread (NPT)

Connection Size

N/A 2 in. - 11.5

Dimension L

N/A 5.04 in

Dimension L2

N/A 4.33 in

Dimension B

N/A 4.72 in

Dimension B1

N/A 3.68 in

Dimension B2

N/A 5.69 in

Dimension H

N/A 4.33 in

Dimension H1

N/A 2.17 in

Dimension H2

N/A 4.49 in

Dimension SW

N/A 3.35 in

Dimension SW1

N/A 0.67 in

Handle Code

N/A 21

Weight

N/A 23.0 lb

Maximum Pressure

N/A 6090 psi

Locking Kit Part Number

N/A LK32/40/50

Port Type

N/A "Diverter" L-Port

Body and Adapter Material

N/A Carbon Steel

Ball and Stem Material

N/A Carbon Steel

Adapter and Stem Seals Material

N/A Buna (Standard)

Ball and Stem Seats Material

N/A Polyoxymethylene (POM) (Standard)

Locking Kit

N/A No Yes

Plating

N/A Zinc Nickel

Number of Ways

N/A 3

Ball Valve Pressure Specifications

Ball Valve Pressure Specifications

N/A Anchor Fluid Power ball valves are tested in accordance with ISO 12266-1 standards. End connections are manufactured in accordance with one or more of the following standards.

SAE J1926-1
ISO 228-1
SAE J518-1
SAE J518-2
ISO 6162-1
ISO 6162-2
ANSI B.1.20.1

Note

Note

N/A Dimensions subject to change without notice.

Only pressurize center port (port #2). Side ports (ports #1 and #3) should not be pressurized or be exposed to back pressure that is greater than the inlet pressure. Failure to follow these guidelines will result in internal leakage through the valve. For applications requiring pressure applied to side ports, please refer to AE3K Series valves.

Please consult your system's seal manufacturer for recommendation of seal selection, as Anchor Fluid Power does not accept responsibility for seal selection.