The LP series contains low pressure quick couplings in 06, 07, LP and SP types. These couplings can be used for a variety of media, typcial for water, fuel, compressed air and oils. They are available in nominal bore sizes ranging from 2.5-50 millimeters and include a variety of material, finish and seal options.
Unit of Measure
Specifications
Brands |
N/A Anchor Fluid Power |
Nominal Bore Diameter |
N/A 7 mm |
Coefficient of Variation (CV) Value/One Side Self-Sealing |
N/A 1.50 |
Coefficient of Variation (CV) Value/Both Sides Self-Sealing |
N/A 1.17 |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA) |
N/A 21.42 L/min |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA) |
N/A 16.71 L/min |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA) |
N/A 75.91 m³/h |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA) |
N/A 59.21 m³/h |
Maximum Permissible Static Pressure for Steel (Coupled) |
N/A 70 bar1,015 psi |
Maximum Permissible Static Pressure for Brass (Coupled) |
N/A 40 bar580 psi |
Maximum Permissible Static Pressure for Stainless Steel (Coupled) |
N/A 60 bar870 psi |
Additional Information
Additional Information |
N/A LP series couplings are available in nominal bore sizes ranging from 2.5-50 millimeters and can withstand pressure up to 1450 psi. Products in this line a wide in a variety of materials, finishes, and seal options. Couplings are either self-sealing, self-sealing adaptors, thru type couplings, or thru type adaptors. View our full catalog of low-pressure Walther couplings below: |
