The LP series contains low pressure quick couplings in 06, 07, LP and SP types. These couplings can be used for a variety of media, typcial for water, fuel, compressed air and oils. They are available in nominal bore sizes ranging from 2.5-50 millimeters and include a variety of material, finish and seal options.
Unit of Measure

Specifications

Brands

Anchor Fluid Power

Nominal Bore Diameter

19 mm

Coefficient of Variation (CV) Value/One Side Self-Sealing

11.60

Coefficient of Variation (CV) Value/Both Sides Self-Sealing

8.40

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA)

165.67 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA)

119.97 L/min

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA)

587.04 m³/h

Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA)

425.10 m³/h

Maximum Permissible Static Pressure for Steel (Coupled)

60 bar870 psi

Maximum Permissible Static Pressure for Brass (Coupled)

30 bar435 psi

Maximum Permissible Static Pressure for Stainless Steel (Coupled)

40 bar580 psi

Additional Information

Additional Information

LP series couplings are available in nominal bore sizes ranging from 2.5-50 millimeters and can withstand pressure up to 1450 psi. Products in this line a wide in a variety of materials, finishes, and seal options. Couplings are either self-sealing, self-sealing adaptors, thru type couplings, or thru type adaptors. View our full catalog of low-pressure Walther couplings below: