The HP series contains high pressure quick couplings. Typical in steel or stainless steel, the HP series is offered with a variety of options and pressure ratings with bore sizes ranging from 4-50 millimeters. Although grouped in the HP series family, subsea variations of the high pressure series is distinctly different. Specifics on the subsea HP series as well as other couplings can be found in the Offshore & Subsea Technology brochure.
Unit of Measure
Specifications
Nominal Bore Diameter |
N/A 4 mm |
Maximum Working Pressure for High Strength Stainless Steel |
N/A 14,500 psi |
Coefficient of Variation (CV) Value/One Side Self-Sealing |
N/A 0.4 |
Coefficient of Variation (CV) Value/Both Sides Self-Sealing |
N/A 0.2 |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (EA) |
N/A 5.71 L/min |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Water (BA) |
N/A 3.43 L/min |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (EA) |
N/A 20.24 m³/h |
Flow (Q) at 20 Degree Celsius (ºC) Temperature and 1 Bar Gradient Pressure - Air 6 Bar (BA) |
N/A 12.15 m³/h |
Maximum Permissible Static Pressure for Steel (Coupled) |
N/A 2000 bar29,000 psi |
Maximum Permissible Static Pressure for Stainless Steel (Coupled) |
N/A 520 bar7450 psi |
