ANCHOR FLUID POWER
ANCHOR FLUID POWER
Mailing Address:
5553 Murray Road,
Cincinnati, OH 45227
Phone: 866.FLANGES
Fax: 513.527.4449
E-Mail: sales@anchorfluidpower.com
Website: www.anchorfluidpow.wpengine.com
Print Back
The 84 Series coupling is a cartridge mount coupling used primarily for subsea tree control systems. Testing has shown that up to 500 connect/disconnect cycles can be performed without damage to the metal seal. The highly reliable 84 Series coupling has been extensively tested, with thousands currently in use today.
Unit of Measure

Specifications

Style

 N/A New

Maximum Radial Misalignment (Tolerance) (±)

 N/A 0.016 in0.40 mm

Flow Factor (Cv)

 N/A 0.55 gpm

Identification Number

 N/A 62373

Component Location

 N/A Top Side (Female)

Cavity Dimension

 N/A 1-1/4 in. - 12 Unified National (UN)

Features

Features

 N/A
  • Check valve
  • Patent 5,645,106
  • The sealing is performed by a metal primary seal and a redundant non-metallic secondary seal
  • High working pressure
  • Connect/disconnect under full working pressure permitted
  • 6mm, 8mm and 12mm bore sizes available
  • Components stamped with a truncated part number (Ident. number) for easy identification

Design Notes

Design Notes

 N/A To achieve the improved tolerance levels, both "new" male and "new" female components must be used.

Note

Note

 N/A The new version of the 84 Series couplings, which allows a greater tolerance for misalignment than the old style. This table should be used for part identification and technical data when designing a new project, incorporating the 84 Series couplings.

Other bore sizes are available. Contact Maxbar for additional information.