Request Information
The 84 Series coupling is a cartridge mount coupling used primarily for subsea tree control systems. Testing has shown that up to 500 connect/disconnect cycles can be performed without damage to the metal seal. The highly reliable 84 Series coupling has been extensively tested, with thousands currently in use today.
Unit of Measure

Specifications

Style

 N/A Old

Maximum Radial Misalignment (Tolerance) (±)

 N/A 0.01 in0.25 mm

Flow Factor (Cv)

 N/A 0.55 gpm

Identification Number

 N/A 39145

Component Location

 N/A Top Side (Female)

Cavity Dimension

 N/A 1-1/2 in. - 12 Unified National (UN)

Features

Features

 N/A
  • Check valve, oversize thread (In the event rethreading of the female mounting cavity is required, increasing the thread to 1-1/2" 12UN allows use of this oversize thread component. This female component mates with either 6mm male component.)
  • Patent 5,645,106
  • The sealing is performed by a metal primary seal and a redundant non-metallic secondary seal
  • High working pressure
  • Connect/disconnect under full working pressure permitted
  • 6mm, 8mm and 12mm bore sizes available
  • Components stamped with a truncated part number (Ident. number) for easy identification

Design Notes

Design Notes

 N/A
  • The "old" female components will NOT mate with "new" male components.
  • It is permitted to mate "old" male components with "new" female components, but the tolerance levels will be those of the less tolerant old style.

Note

Note

 N/A The 84 Series couplings for existing applications using the old style coupling requiring tighter tolerance levels.

Other bore sizes are available. Contact Maxbar for additional information.
Off Request for Quote Request for Quote Request for Quote
Off About Anchor Fluid Power About Anchor Fluid Power About Anchor Fluid Power
Off Contact Us Today! Contact Us Today! Contact Us Today!