Show Menu
Call us: 866-352-6437
866-FLANGESEmail
Request Information Request Quote
The 84 Series coupling is a cartridge mount coupling used primarily for subsea tree control systems. Testing has shown that up to 500 connect/disconnect cycles can be performed without damage to the metal seal. The highly reliable 84 Series coupling has been extensively tested, with thousands currently in use today.
Unit of Measure

Style

 N/A New

Maximum Radial Misalignment (Tolerance) (±)

 N/A 0.016 in0.40 mm

Identification Number

 N/A 62374

Component Location

 N/A Bottom Side (Male)

Cavity Dimension

 N/A 1-1/4 in. - 12 UN

Features

 N/A
  • Check valve
  • Patent 5,645,106
  • The sealing is performed by a metal primary seal and a redundant non-metallic secondary seal
  • High working pressure
  • Connect/disconnect under full working pressure permitted
  • 6mm, 8mm and 12mm bore sizes available
  • Components stamped with a truncated part number (Ident. number) for easy identification

Design Notes

 N/A To achieve the improved tolerance levels, both "new" male and "new" female components must be used.

Note

 N/A The new version of the 84 Series couplings, which allows a greater tolerance for misalignment than the old style. This table should be used for part identification and technical data when designing a new project, incorporating the 84 Series couplings.

Other bore sizes are available. Contact Maxbar for additional information.